M1 Service Instructions

M1: Footstrap Replacement

  • May 22, 2017 // Modified 8 years ago

You will need a 5mm allen wrench and a 13mm wrench.

Step 1.  Remove old strap.

Step 2.  Use the 5mm allen key and 13mm wrench to remove clamp and nuts. You will need to the 13mm wrench to hold the nut while unscrewing bolt with allen key.

Step 3.  Replace with new nuts, bolts and clamp.


Step 4.  Loop strap around back and through the slots at side, making sure length is even.

Related Articles

  • Series 3: Tacho Replacement

    Step 1 – Remove the Handle from the handle rests and place the handle in the full forward position as shown. Step 2 – Stand the WaterRower upright and disconnect the bungee...

  • Series 4: Identifying Rail Sides

  • S1: Monitor Battery Replacement

    Step 1- Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.   Step 2– Remove the Battery Cover as shown.   Step 3- Remove the Batteries as...

  • A1/GX: Forward Riser Replacement

    For Video Instructions, please see the following link: Replacing the Forward Riser Assembly Step 1- Remove handle assembly (see handle removal replacement instructions) Step 2- Remove Recoil Belt (see recoil...