admin


All Posts from admin

M1 Service Instructions

M1: Full Tank Assembly Replacement

Step 1. Remove the handle from the handle rests and place the handle in the fully forward position.   Step 2. Stand the rower upright. Disconnect the bungee from the recoil belt, then lower the rower to normal position.     Step 3.  Using the 5mm ratchet provided with your rower (or a 5mm Allen …

Monitor Series 4 Series 4 Service Instructions

Series 4: Monitor Replacement

1) Remove pin for old monitor. Please be careful of spring which will release when pin is removed. 2) Remove black washer, spring and monitor from bracket. 3) Insert new monitor through bracket on side. 4) Put new spring with zip ties on spigot tube, followed by the black washer. 5) Install R-Clip through the hole in spigot tube. ...