Series 4 Service Instructions

Series 4: Heel Rest Replacement (Push-Button)

  • Apr 27, 2017 // Modified 7 years ago

Step 1– Press Heel Rest Lock Button and remove Heel Rest/Footpads. You may need to use a card (credit card, etc.) to help remove the heel rests fully. Slide the card into the top of the coverplate and then remove heel rests.

Step 2– Press Heel Rest Lock Button and replace Heel Rest/Footpads

Related Articles

  • A1/GX: Sensor Disk Replacement

    Step 1.  Detach the top deck from the tank assembly by unscrewing the upper tie rod bolts and the top deck JCB bolts. *When removing the tie rods, a barrel...

  • S1: Monitor Housing Replacement

    Step 1.  Remove the tie rods and JCB bolts connecting the top deck to the tank assembly as shown. Step 2– Remove the top deck assemble as shown, being careful not...

  • Series 3: Monitor Upgrade

    Step 1- Remove the handle from the handle rests and place the handle in the full forward position as shown.  Step 2- Stand the WaterRower upright and disconnect the bungee...

  • Adjusting the Push Button Footpads