Series 4 Service Instructions

Series 4: Single Bungee Replacement

  • May 18, 2017 // Modified 7 years ago

The bungee is very simple to replace, we’ve provided both written and video instructions for you to make the process even easier!

For Video Instructions, please see the following link:
Replacing the S4 Bungee Assembly

Step 1- Remove the Handle from the handle rests and place the handle in the full forward position.

Step 2- Stand the WaterRower upright and disconnect the bungee from the Recoil Belt as shown.

Step 3- Remove the Bungee from the Rear Spacer and reattach the replacement bungee as shown.

 

Step 4- Reconnect the Bungee to the Recoil Belt as shown.

Related Articles

  • Series 4: Heel Rest Replacement (Push-Button)

    Step 1– Press Heel Rest Lock Button and remove Heel Rest/Footpads. You may need to use a card (credit card, etc.) to help remove the heel rests fully. Slide the...

  • S1: Recoil Bushing Replacement

    Handle Removal Step 1- Remove the handle from the Handle rests and place the Handle in the full forward position.   Step 2- Stand the WaterRower upright and disconnect the...

  • Series 3: Seat Replacement

    Step 1- Loosen the fasteners holding the Rear Spacer to the rails three or four turns each.   Step 2- Remove the seat.   Step 3- Replace the seat. Step...

  • M1: Handle Replacement (plastic clutch)

    For Video Instructions, click here: Replacing the Handle Assembly (Plastic – Bolt On)   Step 1- Remove the handle from the handle rests and place it in the full forward...