M1 Service Instructions

M1: Bungee Replacement

  • May 22, 2017 // Modified 7 years ago

Step 1- Remove the handle from the handle rests and place the handle in the full forward position.

Step 2- Disconnect the bungee as shown.

Step 3- Remove the bungee from the rear spacer and reattach the replacement bungee as shown.

Step 4- Connect the bungee to the recoil belt as shown.

Related Articles

  • S1: Monitor Housing Replacement

    Step 1.  Remove the tie rods and JCB bolts connecting the top deck to the tank assembly as shown. Step 2– Remove the top deck assemble as shown, being careful not...

  • Series 4: Forward Riser Replacement

    For Video Instructions, please see the following link: Replacing the Forward Riser Assembly Step 1- Detach the bungee from the recoil belt. Step 2- Remove handle assembly (see handle removal replacement...

  • S1: Monitor Battery Replacement

    Step 1- Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.   Step 2– Remove the Battery Cover as shown.   Step 3- Remove the Batteries as...

  • Series 3: Oilite Bearing Replacement

    Step 1- Remove the Handle from the handle rests and place the handle in the full forward position. Step 2- Stand the WaterRower upright and disconnect the bungee from the...