A1/GX Service Instructions

A1/GX: Level Gauge Location

The Level Gauge sticker on all Series 4 (S4) model WaterRower units, is located on the side of the tank under the tank stopper.

The Level Gauge sticker on the A1 and Indo-Row units is located on the bottom of the tank. On the A1 and GX WaterRower units, this sticker also has the unit’s serial number printed on it. To locate your serial number, see the following page: Serial Number Locations

Advised volume for WaterRower tank:

15.223 L = 15.223 kg = 33.561 Lb = 4.021 gallons

Gives you:
“Calibration level” on A1/Indo-Row sticker and ≈ “level 17.5″ on S4 sticker

The approximate height is 14 inches off the ground when upright and 8.5 inches off the ground when placed on the ground in rowing position.

Related Articles

  • Series 3: Recoil Belt Buckle Replacement

    Step 1- Pass the Recoil Belt through the bungee buckle with the belt facing the serrations on the buckle as shown.   Step 2- Pass the Recoil Belt through the...

  • A1/GX: Dolley Wheel Replacement

    To order this part, visit our website: WRPD100 – Dolley Wheel Assembly

  • A1/GX: Sensor Disk Replacement

    Step 1.  Detach the top deck from the tank assembly by unscrewing the upper tie rod bolts and the top deck JCB bolts. *When removing the tie rods, a barrel...

  • A1/GX: Forward Riser Replacement

    For Video Instructions, please see the following link: Replacing the Forward Riser Assembly Step 1- Remove handle assembly (see handle removal replacement instructions) Step 2- Remove Recoil Belt (see recoil...