A1/GX Service Instructions

A1/GX: Dolley Wheel Replacement

  • May 19, 2017 // Modified 8 years ago

To order this part, visit our website: WRPD100 – Dolley Wheel Assembly

Step 1: Remove the current dolley wheel using your 5mm Allen key. Replace current dolley wheel with new set, tighten with Allen key.

Related Articles

  • M1: Forward Riser Replacement

    Step 1.  Place handle into the most forward position near the Forward Riser Pulley. Step 2.  Remove the handle rest bolts. Step 3.  Pivot back the footboard. Step 4.  Pivot back the...

  • A1/GX: HiRise Adapter Instructions

    The GX HiRise Adapter has been designed to raise the GX WaterRower Model approximately 7″ (175 mm) in order to provide an elevated seat position when rowing while increasing the...

  • S1: Monitor Settings Calories Burned

  • Series 3: Monitor Troubleshooting

    Battery Replacement Your Series 3 WaterRower requires 4 (AA) batteries for monitor function. If your monitor does not power on, these batteries likely need replacing. The battery pack is located...