M1 Monitor Service Instructions

M1: Monitor Battery Replacement

  • May 22, 2017 // Modified 7 years ago

Step 1- Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Step 2– Remove the Battery Cover as shown.

Step 3- Remove the Batteries as shown.

Step 4– Replace the Batteries as shown.

Step 5- Replace the Battery Cover as shown

Step 6- Replace the screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Related Articles

  • A1/GX: Foot Strap Replacement

    Replacing the foot strap on the A1/GX WaterRower is very simple; in order to replace the strap, you will need a pair of scissors and a Phillips screw driver. To...

  • M1: Monitor Sensor Disk Replacement

    Sensor Disk Replacement: View a video for this Step 1– Remove the Handle from the handle rests and place the handle in the full forward position as shown.   Step 2- Stand the...

  • S1: Handle Replacement (metal clutch)

    For Video Instructions, click here: Replacing the Handle Assembly (Metal/Velcro attachment) Step 1- Remove the Handle from the handle rests and place the handle in the full forward position Step...

  • Series 4: Recoil Belt Replacement (Clip On Recoil)

    For Video Instructions, click here: Replacing the Recoil Belt Step 1- Remove the handle from the handle rests and place the handle in the full forward position Step 2- Stand...