Series 3 Service Instructions

Series 3: Dolley Wheel Replacement

  • May 24, 2017 // Modified 7 years ago

Step 1- Assemble the Dolley Wheel to the rail in the sequence shown.

Related Articles

  • A1/GX: Oilite Bearing Replacement

    Step 1- Remove the Handle from the handle rests and place the handle in the full forward position. Step 2- Stand the WaterRower upright and disconnect the bungee from the...

  • Series 4: Monitor Battery Replacement

    Step 1- Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.   Step 2– Remove the Battery Cover as shown.   Step 3- Remove the Batteries as...

  • S1: Monitor Board Replacement

    Step 1- Remove screws (2) fastening the battery cover at the rear of the monitor as shown. Step 2– Remove the Battery Cover as shown. Step 3- Remove the Battery...

  • M1: Footstrap Replacement

    You will need a 5mm allen wrench and a 13mm wrench. Step 1.  Remove old strap. Step 2.  Use the 5mm allen key and 13mm wrench to remove clamp and...